Nozzle copes with lumpy liquids

Published: 27-Aug-2010
Manufacturing

The latest addition to BETE’s range of products is a spray nozzle that ensures clog resistance. The MaxiPass L is an axial, full cone nozzle with a large internal flow passage said to be ideal for low flow spraying applications where the liquid could be contaminated or dirty with the potential to cause clogging problems.

The new nozzle incorporates the same internal S-shaped vanes used in the MaxiPass large flow nozzle (which enable large particles to pass through without creating a blockage) but comes in a more compact size and is suitable for flows as low as 0.44 lit/min.

The MaxiPass L is available in 1/8 inch and 1/4 inch pipe connection sizes, delivering a full cone spray pattern in either narrow, medium or wide spray angles. Other features include high energy efficiency and uniform spray distribution across a range of flow rates up to

7.94 lit/min. The nozzle body is available in brass, 303 and 316 stainless steel while the vanes are made of 316 stainless steel for optimum wear and corrosion resistance.
See more

You may also like

Manufacturing

BETE’s new air atomising nozzle handles high viscosity fluids effectively

Read more
Allows for spraying at fine atomisation, but low flow rates

Trending Articles

  1. Medik8 recalls three sunscreen products over safety concerns Testing of the skin care brand’s Physical Sunscreen SPF50+ found that the product is unlikely to meet the labelled SPF rating
  2. You need to be a subscriber to read this article.
    Click here to find out more.
    Olaplex to Salt & Stone: All the beauty M&A deals of 2026 so far Estée Lauder Companies, Henkel, and Procter & Gamble are among the beauty giants bolstering their portfolio with acquisitions such as Forest Essentials, Olaplex and Wonderbelly in a busy start to the year for beauty M&A
  3. Amika urges customers to stop using product after voluntary recall The hair care brand said the batches did not meet the quality standards due to presence of bacteria
  4. At Cosmopack 2026, Marchesini Group Beauty presents a new innovation on its Turbo- Mek 150 The innovations to be presented by Marchesini Group Beauty at Cosmopack 2026 will include a new process technology called Turbo 3D, developed in-house to meet the growing demands for operating flexibility and precise control from producers of emulsions, solutions and suspensions
  5. How four innovation partners are shaping the future of cosmetic development Industry partners from ingredients, devices, packaging and nutricosmetics highlight the innovation priorities shaping cosmetic development today

Upcoming event

Packaging Innovation in Beauty: Sustainability, Materials & Consumer Experience

30 April and 7 May 2026 | Virtual See all

You may also like

Manufacturing

BETE’s new air atomising nozzle handles high viscosity fluids effectively

Allows for spraying at fine atomisation, but low flow rates
Manufacturing

At Cosmopack 2026, Marchesini Group Beauty presents a new innovation on its Turbo- Mek 150

The innovations to be presented by Marchesini Group Beauty at Cosmopack 2026 will include a new process technology called Turbo 3D, developed in-house to meet the growing demands for operating flexibility and precise control from producers of emulsions, solutions and suspensions
Manufacturing

Medik8 recalls three sunscreen products over safety concerns

Testing of the skin care brand’s Physical Sunscreen SPF50+ found that the product is unlikely to meet the labelled SPF rating
You need to be a subscriber to read this article.
Click here to find out more.
Manufacturing

Olaplex to Salt & Stone: All the beauty M&A deals of 2026 so far

Estée Lauder Companies, Henkel, and Procter & Gamble are among the beauty giants bolstering their portfolio with acquisitions such as Forest Essentials, Olaplex and Wonderbelly in a busy start to the year for beauty M&A
Manufacturing

Ectoin natural continues to be one of the most sought-after active ingredients in modern skin care

As the original manufacturer, bitop is proud to showcase its full potential at in-cosmetics Global
Manufacturing

Ink: A New Fragrance Genre Presented by Iberchem at In-Cosmetics Global 2026

A new family of scent aesthetics is emerging from the latest launches in niche perfumery: the smell of ink
Manufacturing

Givaudan expands Türkiye presence as part of high-growth market strategy

Strengthening its footprint in the country forms part of the Swiss fragrance and beauty company’s 2030 strategy to offer localised solutions in high-growth markets
Subscribe now