Exfoliating cream cleanser with Lipo JJM and Lipo WSF
A thick, rich cream for cleansing and exfoliating with Lipo® JJM 24/60 for an attractive textural appearance plus soft exfoliation and Lipo® WSF 35/60 which imparts a moderate abrasive property.
DESCRIPTION:
A thick, rich cream for cleansing and exfoliating with Lipo® JJM 24/60 for an attractive textural appearance plus soft exfoliation and Lipo® WSF 35/60 which imparts a moderate abrasive property. Jojoba Buttercreme® provides a soft foam texture and leaves skin feeling silky and refreshed.
FORMULATION:
| SEQUENCE | PERCENT | INGREDIENT | INCI NAME |
|---|---|---|---|
| 1 | 65.10 | Deionized Water | Water |
| 1 | 2.00 | Liponic® EG-1 (1) | Glycereth-26 |
| 1 | qs | Preservative | Preservative |
| 1 | 30.40 | Ultrathix® P-100 (8) | Acrylic Acid/VP Crosspolymer |
| 2 | 10.00 | Hostapon® CI-85 (148) | Sodium Cocoyl Isethionate |
| 2 | 5.00 | Cocamidopropyl Betaine | Cocamidopropyl Betaine |
| 3 | 6.00 | Lipocol® C (1) | Cetyl Alcohol |
| 3 | 1.50 | Lipo Stearic Acid (1) | Stearic Acid |
| 3 | 4.00 | Jojoba Buttercreme® (144) | Butyrospermum Parkii (Shea Butter) (and) Jojoba Alcohol (and) Potassium Jojobate (and) Simmondsia Chinensis (Jojoba) Butter (and) Propanediol |
| 3 | 3.00 | Lipovol® MOS-130 (1) | Tridecyl Stearate (and)Tridecyl Trimellitate (and) Dipentaerythrityl Hexacaprylate/Hexacaprate |
| 4 | 1.00 | Lipo® JJM 24/60 (1) | Simmondsia Chinensis(Jojoba) Seed Powder |
| 4 | 2.00 | Lipo® WSF 35/60 (1) | Juglans Regia (Walnut) Shell Powder |
| 4 | qs | Fragrance | Fragrance |
(1) Lipo Chemicals, Inc.
(119) Ruger Chemical
(8) Ashland
(144) Lipo Chemicals - Desert Whale Jojoba
(148) Clariant
PROCEDURE:
1. In main kettle, disperse Ultrathix P-100 into Sequence 1 and mix for 5 minutes at room temperature.
2. Heat Sequence 1 to 70-75°C, slowly add Sequence 2, one ingredient at a time, until well incorporated.
3. In a separate vessel, combine Sequence 3, heat to 70°C, add to main kettle, mix until uniform, until a smooth emulsion is formed, scraping sides often.
4. Start cooling batch with slow mixing.
5. Continue cooling to 35°C.
6. Add Sequence 4, mix until uniform.
SPECIFICATIONS:
pH: 6.0 - 6.5
Viscosity: RVT/TF @ .3 rpm = 900,000 cps ± 10%
Stability: 1 Month at 50°C
